I’ve been getting in as much sewing possible before good weather hits here in Michigan, so I’ve really been putting in the hours on my machine.  Soon there will be lots of yard work and other outdoor activities.  I have so many quilt designs drawn out in my notebook that I want to make – there’s just not enough hours in a day.   I’ve wanted to do this pinwheel quilt for a while and knew I was going to make pinwheels popping out on a white background.  I wasn’t sure about the color scheme at first, but it evolved to become a very colorful quilt!  Stay tuned because I am writing a full pattern for this quilt and hope to have it ready soon.   There’s so many color possibilities for this quilt – I would love to make a navy and white one, too.

This quilt was made of mostly of Kona solids – White, Orange, Pear, Baby Pink and Bright Pink.  The dotted pinwheels on the front is a fabric I really love – it’s called “Sunkissed” by Michele D’Amore for Benartex Fabrics.  So fun!  I used it as the backing fabric, also. Unfortunately, this is a hard to find fabric now.  I’ve been hoarding it for a while.

I pondered how to quilt this and in the end I ended up doing modern diagonal lines, going in just one direction.  It was tempting to quilt it both ways, but I restrained myself!  Because I followed the pinwheels and went right down the diagonal corner of the squares,  I did not need to mark my quilting lines in any way.   I used a 4.0 inch stitch length on my machine.   The batting was Warm & White from the Warm Company.

The binding is a fabric I’ve had in my stash for a while, just waiting for the perfect quilt and this was it!  It’s a pink stripe from the Hi De Ho Collection from Moda.  I made 2.5″ binding and did my usual machine binding method.

\

This quilt finished at 40″ x 47″.  It’s a great size for a child to snuggle with or as a great design accent for a room.

I’m listing this quilt in the shop.

Thanks for dropping in – I hope you’re making something!

Elaine

Save

I love this quilt.  I so enjoyed making this quilt and watching it come together.  I love high contrast fabrics so much and putting them together with white solid fabric is so eye catching.  After I finished the Zuzu quilt, I really wanted to do something similar, only with squares.  I knew I wanted patchwork, but I didn’t want the whole quilt to be patterned fabrics, so I broke it up with blocks of white and I think the design is bold because of it.

I have lots of gorgeous blue fabrics from a block of the month club I joined and decided I did not like.  I didn’t like the blocks, but I loved the fabrics – gorgeous Cotton & Steel, Robert Kaufman, Art Gallery, Carolyn Friedlander, etc.  These were so fun to sort through and select for the quilt.

For the construction of this quilt, I made nine-patch blocks by cutting 3″ strips of fabrics from the width of fabric and then cutting those down to 3″ x 10″ strips.  I sewed three strips together, randomly, and then subcut these into 3 strip sets.  Then after I had sewed multiple strip sets, I sewed these randomly together to get nine-patch blocks.  I pressed all the seams one way on all my strip sets, so I could nest the seams together when I did the nine-patch blocks.  Make sure all the seams are pressed the same way on your finished blocks so that you can alternate seams on your rows and nest them together.

After your blocks are sewn, trim them to 8″ square.

After I had all my nine-patch blocks finished, I cut  8″ squares of solid white.  Then I laid out the quilt randomly, alternating nine-patch blocks and white blocks.  I made 46 nine-patch blocks and cut 17 squares of solid white.

I was going to do a scrappy binding, but then decided to use a tiny navy blue and white dress stripe from Dear Stella that I thought went nicely with the quilt.  I did my usual machine binding for extra durability.

I stitched in the ditch for the quilting, because I felt I didn’t want the quilting to interfere with the beautiful patterns in all the fabrics.

I also used TWO layers of Warm and Natural Warm and White cotton batting again. This makes the quilt extra heavy and extra warm and it has become my favorite way to make a quilt now.  I just love the extra heft and weight that it gives a quilt.  I actually gently prewash my batting because I don’t want it to shrink much when it’s in the quilt and laundered in the future.  Warm and Natural batting actually holds up well in a gently prewash, but other battings I’ve used do not.  I think that shows how well the batting will hold up once it’s in the quilt and going to be washed for years to come.

The backing fabric is an absolute favorite of mine – 108″ wide quiltback “Language of Colors” by Windham Fabrics.  I  just love this fabric and the punch it adds to a quilt, without competing with the front of the quilt.

The finished quilt is 52″ x 67″, a great size to snuggle up with.

This quilt is for sale and I’m listing this in the Shop.

Have a wonderful week!
Elaine

Save

This quilt all started with the backing fabric.  I saw this fabric and fell in love with it and knew right away I wanted to do a red, grey and white quilt top – a top with stark white fabric. The quilt backing fabric is Zuzu Circles by Alice Kennedy for Timeless Treasures.  Isn’t it just so awesome?

I had a lot of fun picking out reds and grey fabrics from my stash.  I tried to only use fabrics that had a lot of high contrast to them.  I used Kona White as the background fabric and wanted the prints to really stand out against that.  I also cut up some of the backing fabric and used a little of that on the front, too.

The quilt top was made up of one block that looked like this and that I randomly rotated all over the quilt top to get a random scattering of the prints:

The blocks were made up of eight 3″ x 2.5″ rectangles sewn together and then two 2″ x 8.5″ strips of white sewn onto the sides, to make an 8.5″ block.  I used some 8.5″ plain squares of Kona white to make some negative space on the quilt. There were 54 blocks total for the whole quilt, 6 across and 9 blocks down.

I used Warm and White cotton batting for this quilt – a must for white quilts where you don’t want the batting to dull the whiteness.  I used TWO layers of batting on this quilt – I wish you could feel how heavy and warm that makes the quilt.  I’ve been doing that a lot lately and really like it.  It still machine quilts up just fine.  If you use two layers of batting, do make sure that you use a heavier needle – a #14 quilting needle, to get through all those layers.

For the binding, I had to go with my favorite gingham binding and it was perfect because I had used some of the gingham in the quilt top.  It’s Robert Kaufman Carolina ⅛” Gingham in Silver.

This quilt finished at 48″ x 72″, a great size to curl up for a nap with – it’s long enough for just about anyone.  I never make my quilts more than 60″ wide, though, because that is the width of my ping pong table and that is where I baste them!  I can make them as long as I want, though.

This quilt top sewed up so quickly – it was done before I knew it.  My least favorite part of quilting is sewing the quilt back together.  I’ve been using a method recently that makes this process a lot easier  ➡︎  I’m going to be posting about it next time, I hope!

Thanks for stopping by!
Elaine

Save

Save

Save

This is my last quilt for 2016.  It’s something I wanted to make for a while – a quilt that matches our bedroom colors.  It’s a nice throw size for when you want to take a nap back in the bedroom.  And I made it with one of my favorite fabrics, Ombre, from V&Co.  This quilt was made with just one color of Ombre!  It’s a gradiated fabric and it gives the appearance that you used several different fabrics.

I made this quilt entirely from half square triangles.  I made them using an eight-at-a-time method, which I’m going to write about in my next post.  It’s a super fast way to make eight HSTs, sewing only two seams together and making 4 cuts.  I made the blocks 4.5″ and I made a total of 192 blocks.

I also did something that I did in my last quilt, which was to use two layers of batting.  I liked it so much in my Dotted Flying Geese quilt that I thought I would try it again.  It makes a very warm quilt.  I used one layer of Warm and Natural 100% cotton batting and one layer of Hobb’s 80/20 batting.  I was still able to machine quilt with no puckering or tucks.  I made sure to lower the tension on my machine.  I quilted with Aurifil 50 wt thread at a 4.0 stitch length.

For the backing, I used a favorite fabric – Modern Background Notes by Zen Chic. I love the writing on this fabric and thought it was perfect for this quilt.

I used a very simple binding, because I didn’t want the quilt to be too busy.  I cut 2.5″ strips for the binding and sewed it on by machine using this method.

The finished quilt measures 64″ x 48″.   I love the way it turned out and it looks so nice at the foot of our bed.

Thanks for stopping by and here’s wishing everyone a wonderful holiday season!

Elaine

I always had a vision for this quilt – using only dotted fabrics of all sizes and only in black and white.  I used great big dots and pin dots and everything in between.  It made a very modern, bold quilt. Normally, I don’t like to make flying geese blocks because there’s so much wasted fabric but in a future post, I’m going to show you how to make them using a no-waste method. 

I thought about putting these flying geese on a white background but it seemed a little too stark.  I then pulled out one of my all time favorite fabrics from Zen Chic – Ink Modern Background in Grey.  I paired this with Robert Kaufman Kona Solid in Silver and randomly made all the backgrounds in the blocks from these two fabrics.

The flying geese themselves were made of many different dotted fabrics from my stash.  I wasn’t able to identify every single dotted fabric but here are some that I know and are a favorite, in case you are wondering what some of them are:  Jumbo Dots by Loralie Harris – if you don’t know her line of dotted fabrics, check them out!  So very fun and inspirational.  Another dotted fabric I really love is Hello Bear Firefly in Whisper, an Art Gallery Fabric.

The finished quilt is  55″ x 61′.  Each flying geese block was 3″ x 6″.  I made 180 blocks.  I made them using Bloc Loc rulers, which I’m going to write about in a future post.  This method made these blocks very easy to make and very accurate.

For the backing fabric, I wanted to keep the dot theme going so I chose a fabric from Robert Kaufman’s Spot On collection in Steel.  It’s  a 108″ wide fabric, perfect for a quilt backing. It was the perfect color and complement to the front, I thought.

For the batting, I did something very different.  For this quilt, I pictured a heavy, warmer quilt than just the regular layer of cotton batting.  But I didn’t want a tied quilt.  So I took a chance and used two layers of batting and machine quilted it.  It worked great!  And I ended up with a nice, heavy, more substantial quilt.  Very warm. I used two layers of The Warm Company’s “Warm Bond” quilt batting.  It’s an 80/20 batting, which they are actually discontinuing.  But I heard from The Warm Company and they say they are working on a new 80/20 batting, which should be available this November.

I ditch stitched the whole quilt because I just couldn’t picture a good quilting pattern that would look right on the flying geese.  I used a light gray Aurifil 50 wt thread on the top and a darker gray in the bottom, to match the backing fabric.

For the binding, I just had to give the quilt a little pop of color with all that grey, white and black.  And the binding had to be a solid – no stripes or patterns.  There is just way too much going on with the quilt itself.  But which color?  After trying several possibilities, I ended up with the Kona Cotton Solid in Caramel.  I just love how it looks on the quilt.

I’ll be putting this quilt in the Shop.

Have a great weekend, everyone!
Elaine

I’m linking up to Free Motion by the River,  Sew Cute Tuesday and  Let’s Bee Social over at Sew Fresh Quilts!  Check it out!

Save

Save

Save